Some knowledge sharing for maintenance and maintenance of vegetable washing machine.

The good or bad of a machine is not only to see the quality, but also needs our later maintenance and maintenance, the machine has a certain life in the process of our use. If we can do it well in the process of use, do not let it be hurt unnecessarily, then the service life of the machine will also be corresponding. Extend. Speaking of which, do you really want to know how to maintain and maintain the machine when using vegetable washer? Let's take a look at the knowledge in this area.
1. The adjustment of the chain
The adjustment is carried out after the motor is stopped. The chain is pressed with the finger in the middle of the two sprocket. The compression amount is generally between 4 and 9 millimeters. When the standard is worth the time, the inertia wheel is adjusted to the prescribed tightness.
Two, the adjustment of the belt
When the motor stops, at the middle of the two belt pulley, the compression value of the finger (middle finger and index finger) is 7 to 12mm as the standard value. When the value is greater than the standard value, adjust the idle wheel to the specified tightness.
Three. We do not use preservation for a long time
When we have a long time to save and not use, we can rinse and clean the objects of every part of the soil. All the revolving parts, belts and chains should be completely removed and all the revolving parts and the friction active parts are fully injected to four to prevent the appearance of rust.
The vegetable washer is cleaned by bubble bath. The washer is cleaned by bubble. It is suitable for cleaning vegetables. It can be determined according to the quantity of products.
The vegetable cleaning machine is made of stainless steel SUS304/2B material except for motor, bearing and other standard parts, which is completely in line with sanitary requirements for export food. The equipment is equipped with a bubble generation device to make the material roll in a rolling state and remove the effect of the product's surface. At the same time, a proper amount of medicament can be added to the disinfection and fixation. The floating material can overflow from the overflow tank and the sediment is discharged from the mouth to achieve the purpose of cleaning. The bubble cleaning machine is designed for the material with high requirements. It is suitable for the cleaning and soaking of the grainy, leafy and rhizomatous products such as vegetables, fruits, aquatic products and so on.